Features Key Features
- Christenson Surf Rocker
- Traction Tech 2.0
- 3D Base Contour 3.0
- FSC™ Bamboo Surf Core
- Biax Fiberglass
- Carbon Web Fused Reinforcement
- V-Core Construction
- Sintered 9900 Base
Quick Sizing Tip
- Jones Snowboards recommends going 4-8(cm) shorter than your traditional directional freeride board.
- Progressive Sidecut
- Blunt Nose
- Eco-Plastic Topsheet
- Recycled ABS
- Oversize Recycled Steel Edges
- FSC™ Sustainable Wood Core
- 1% For The Planet
- Supports “Protect Our Winters”
Christenson Surf Rocker – Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mountain Surfer and Storm Chaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board the nose ramps up out of the snow for insane float on the deepest days.
These subtle rocker contours match a Christenson surfboard rocker profile.
Traction Tech 2.0 – Traction Tech 2.0 utilizes two bumps per edge (front binding, back binding) for improved edge control and enhanced grip in all conditions.
3D Base Contour 3.0 – Freeride oriented, 3D Contour Base 3.0 features a generous 7mm of spoon bevel in the nose and tail. Core
FSC™ Bamboo Surf Core – Triple density Bamboo Surf wood core that features primarily paulownia stringers with bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power. Laminates
Biax Fiberglass – A dual-direction, dual layer, stitched fiberglass laminate that provides a fun and forgiving ride due to its tensile strength, reliability and snappy response.
Carbon Web Fused Reinforcement – Web Fused Carbon stringer pack helps reinforce the board to increase durability and reduce vibrations.
V-Core Construction – The V-Core Construction has a slightly softer flex in the center of the board for improved maneuverability and a stiffer flex from the inserts through the tip and tail for stability and pop. Base
Sintered 9900 Base – Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair and extremely quick on snow. Details
Progressive Sidecut – Delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Blunt Nose – Provides the loft, or float, benefits of a much longer nose without the “snow plow” rounded tip and its extra swing weight.
Eco-Plastic Topsheet – Bio-plastic top sheet made from Castor beans features a subtle texture for increased durability. This eco-material is lightweight and chip/scratch resistant.
Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by only using recycled plastic.
Oversize Recycled Steel Edges – All Jones boards are made with oversize recycled steel edges for added durability and improved production sustainability.
FSC™ Sustainable Wood Core – All Jones wood cores are made with Forest Stewardship Council (FSC™) certified wood. Every piece of wood used comes from a responsibly managed forest.
1% For The Planet – Jones Snowboards has committed to contribute at least one percent of their annual sales to environmental causes. The mission of 1% for the Planet is to “build, support and activate an alliance of businesses financially committed to creating a healthy planet.”
Supports “Protect Our Winters” – Protect Our Winters (POW) was started in 2007 by THE Jeremy Jones. It serves to educate about the importance of environmental protection to ensure a prosperous future for the outdoor recreation economy. Specs
|Suggested Boot Size (US):||11 & under||12 & under||13 & under|
|Waist Width (cm):||25.6||26.0||26.4|
|Weight Range (lbs):||130 – 180||150 – 200||170+|
|Stance Set Back (in):||0||0||0|
|Sidecut Radius (m):||6.9||7.1||7.3|
|Effective Edge (cm):||113.0||116.2||119.4|
|Tip Length (cm):||40.0||40.4||40.8|
|Tail Length (cm):||20.0||20.4||20.8|
|Tip Width (cm):||30.0||30.53||31.07|
|Tail Width (cm):||28.0||28.53||29.05|